eZeebike electric bicycle conversion kit

Description

Using the same powerful and reliable electric motor and battery system found on all of the eZeebike range, the eZee kit converts your bicycle into a state-of-the-art electric bicycle. Installation can be done in 2 hours with basic DIY skills and a set of bike tools. However, we always recommend that this work is carried out or at least checked by a competent bicycle mechanic for the best ride possible. We can install this ebike conversion kit for you, conditional upon the bicycle being fit for conversion, which depends on some factors such as size, shape and mechanical condition of the bicycle.

We used this ebike conversion kit very successfully on our Kona Ute cargo ebike conversion, riding all the way from Canberra to Melbourne for Ausbike through rain and frost without a hitch.

Some Specifications:

Motor

Geared Drive 5:1 Planetary gear hub motor drive gives high torque output.

Steel sun and ring gears

Wheel Assembly

Hub Motor is already built into the front wheel. The rim is black, CNC machined and double walled and uses high quality 13G stainless spokes.

The Front Electric Hub Motor has a 6-hole ISO disc mount and 180mm rotor, so this kit is disc brake compatible.

Puncture resistant Schwalbe Marathon Plus tyre with reflective side walls provided on motor wheel. We can provide a matching Schwalbe Marathon Plus tyres for your rear wheel as well, for better rolling performance, fewer punctures and higher uniformity on the converted ebike.

20", 26" and 700C front wheel options available.

V brake bicycles can use this ebike conversion kit. Simply ignore or remove the disc rotor.

Compatibility

Pedal Assist or full e-Bike configurations are both available. Speed limiters are also available.

Battery is attached underneath the rear carrier rack. You can also have a battery slide on top of a rear seat post clamp carrier rack for those bikes that can't fit normal pannier racks (such as soft tail mountain bikes) or finally, the simple, one size fits all solution - the battery in a waterproof bag. This last configuration allows use of the 37V 14Ah lithium battery for this conversion kit.

Controllor:

Waterproof, Self Diagnostic Military grade conformal coating, potted and sealed aluminum casing. LED light codes for quick troubleshooting

Battery:

Lithium Ion 370 Wh battery 37V 10Ah with Battery Management System (BMS): 3.1 kgs with casing. Smart and quick top up with 4A battery charger. The 37V 14Ah battery is available for this kit for an additional $250

Warranty:

Hub motor, controller and battery are all warrantied for 2 years.

Weight: 15 kg